本文へ移動

Production Facilities and Equipment

Production Facilities and Equipment

Even though small of scale compared to other competitors, at our Head Production Facilities, we produce small and medium laminated Posts/beams/studs for construction in batches and in a timely fashion, ensuring the highest quality and meeting our customer's exact needs. Utilizing European timber and other raw materials that are delivered daily from Akita Port, we consistently deliver our trustworthy products according to our production schedule. 

Production Facilities ( laminated posts beams and Studs )

First Production Step: High Speed Moulder Line

In this first step,
 
we process Kiln dried timber (lamina) imported by container from North and Central Europe in our moulder that shapes the four sides of the lamina.
 
Our professional staff then grade and separate the processed lamina, inspecting every piece for defects and the precision of each cut.
 
Additionally,
 
we check each piece for moisture content; adhering to our strict purchasing agreements, only lamina that is 2% above or below 12% moisture content will be accepted for further processing.
 
After careful examination of appearance, knots, and straightness, each piece of lamina is separated according to its condition and is sent to the second production step of pressing. 

Second Production Step: The Press Line

lamina that was processed in the moulder is then pasted together and pressure bonded for a set time- we are able to produce custom sizes (thickness X width X length = ㎥). 
The lamina is pressed using two machines.
 
The first press is a laminating one that presses the stacked wood vertically,
and the second machine, a rotating press, presses the lamina horizontally on its side. 

Third Production Step: Finishing Line

After pressing, the wood is then carefully inspected again and prepared for the finishing production.
 
The wood is separated by type (Posts,Beams, etc.), then graded (A,A`,B), packed and prepared for delivery

Access

Takanosu Production Facilities and Products

We produce wood products for residential construction and interior construction at our Takanosu Production Facilities.
 
The operators and their machines are able to individually process each order according to each building plan, all the while carefully inspecting the wood, ensuring a trustworthy product is delivered to our customers.

Specialized selected veneers

Akita Prefecture has long been known as a timber-producing region.
After careful inspection by our sure eyes, natural, fine quality Akita cedar is made into veneer .
 
Besides Akita cedar panels, we offer products made from Japanese cypress and other tree species based on our customer's needs and as always these are inspected, separated, and graded.

Press Production Step

Veneers  are pasted together and then pressed.
After press completion, the Posts and other products are carefully delivered one by one to our customers.

Access

2018年12月
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
  • 休業日
  • 営業日
二ツ井パネル株式会社
〒018-4211
秋田県北秋田市川井字横呑沢5-130
TEL.0186-78-2132
FAX.0186-78-4755
構造用集成材
柱、通し柱、積層間柱
化粧貼構造用集成材
化粧貼造作用集成材
 
【関東営業所】担当:鬼頭
〒335-0021
埼玉県戸田市新曽1310-6
リュエル北戸田204号室
FAX:048-443-7733
TOPへ戻る